Flush Grid
Resistant belt with 27.2mm (1”) pitch, with pressure rods and flush edges. A 38% open area, USDA approved for vegetable transportation, also available in ONEPIECE Live transfer style.

Materials:
PP=Polypropylene
PE=Polythylene
A=Acetal
ECA= Electrically conductive Acetal
HSEC=High resistance electrically conductive
HRN= Heat resistant nylon
FR-TPES= Flame retardant thermoplastic polyester
IRN= Impact resistant nylon.

Agency approval:
USDA- United States Department of Agriculture
FDA-Food and Drug Administration
A- Australian Quarantine and Inspection Service
C- Canadian Food Inspection Agency
M- Milk Industry of the New Zeland’s Ministry of Agriculture and Forestry
UL- United States Growers Association
Z- New Zeland’s Ministry of Agriculture and Forestry.

Molded and Split Sprockets
Intralox offers molded sprockets with 6, 9, 10, 12, 17, 18 or 20 teeth. Split sprockets are available with 12, 15, 17, 18, 20 or 28 teeth. Intralox can manufacture sprockets (both plastic and split) with different numbers of teeth if the application cannot use the standard sizes.

Molded Toothplate Split Sprocket
These new sprockets provide flexibility for easier retrofits and change-outs. They are available in 6.1'' (155 mm) and 6.8'' (173 mm) sizes. Sprocket hub is polypropylene, with glass-filled nylon toothplate.

Flights
Flush Grid base flights are available in 1'' (25 mm) and 2'' (51 mm) heights. Flat Top base flights are available in 1'' (25 mm), 2'' (51 mm) and 3'' (76 mm) heights. These flights can be cut down to any height to meet customer requirements.

Sideguards
Sideguards are used to assure product containment and are available 2'' (51 mm) high. Made in the standard overlapping design, they are an integral part of the belt and are fastened by the hinge rods.

Finger Transfer Plates
These comb-like plates are designed to eliminate tipping problems at product transfer. The 18 fingers extend between the belt’s ribs, allowing a smooth continuation of product flow. Available in 4'' (102 mm) 12 finger for use when retrofitting from Series 100 Raised Rib.

Intralox Screws (Standard size)