In the refrigeration area we have available commercial and industrial equipment.

* Air cooled condenser units, hermetic, semi-hermetic and scroll interior / exterior, equipped with highly efficient compressors.
* Valves, filters, pressure and temperature controls.

* Copper piping and fittings.
* Gas refrigerant oils.
* Insulation material.
* Electrical components.

* Separate condenser unit.

This type of capacitors are integrated into separate packages with all components included.

1. Most use air-cooled condensers.
2. They can be installed outdoors.
3. They may use a reciprocating compressor, scroll or screw type.
4. It requires one for each system.

* Evaporated for cold high, medium and low profile, air defrost system, hot gas and electrical resistance. We evaporators with special characteristics.

* Refrigerated display cases for vegetables, fruits and meats reach-in doors, pre-cooled systems, blast freezers.

* Sales and installation of cold rooms (conservation and freezing) manufactured in modular panel with automation system.
* Overhead doors, vinyl curtains Hawaiian, seals and ramps for sliding doors and more.

Shade Hawaiian type is the necessary complement to maintain the temperature inside the chamber when the door is open during periods of product loading.

1. Made with strips of high quality PVC.
2. Import galvanized fitting screw nuts electro soldiers and security.
3. Availability for storing and freezing.

* Preventive maintenance services.

Agricultural solutions.

1. Cold storage
2. Pre-cooling chambers
3. Ripening tomato
4. Antechambers boarding platform
5. Bodegas walls and ceilings insulated refrigerant
6. Warehouses Agricultural and mezzanines
7. Gatehouses

Handler for forced air-cooled pre Forced air cooling

* Structure made of epoxy coated steel corrosion.
* Cover in aluminum foil diamond.
* Centrifugal fan (turbine) with direct drive and keeps for protection.
* Electric Motor 6 pole sealed 1.170 RPM, voltage 230/460/3/60 hz.
* Safety switch type blades.
* Ex direct expansion evaporator and high efficiency, made with copper tube and aluminum fins.
* Mattresses for receiving pallets.
* Lona down for sealing pallets.
* Panel with electronic temperature controller, pilot lights and selector switches for ignition type of handler and condenser.
* Gateway for service.
* Lamp lighting inside.
* Thermostatic expansion valves.
* Solenoid valves in liquid line.
Pressure reducing valves * Evaporation Rate (EPR).

Number of pallets in system capacity BTU / HR System hp electric charges
230 v/3f 460v/3f
8 195.000 condenser unit 104A 52 25
MAT handler 42A 21A 15 8-15
Condenser unit 12 337.000 40 170 A 85 A
MAT 1912-1920 handler 20 54 A 27 A
Condenser unit 16 458.000 60 230 A 115 A
MAT handler 16-25 25 68 A 34 A

Forced Air Colling System

The pre-cooling system with forced air pressure is based on the concept that environmental conditions are ideal for pre cooling and preserving of fruit and vegetables are very high relative humidity without condensation, absence of contaminants and stable temperatures, and that thermal fluctuations can cause weight loss product and cause condensation, thus inducing the deterioration of the fruit.

Advantage

98% relative humidity to prevent weight loss products. Handler corrosion free. 98% relative humidity for extended product life. Minimum time of 1 hour pre-cooled depending on the product. Operation and maintenance easier. Lower power consumption

Product

Temp. Product entry
Temp. final product has Approx. of enfriamineto
° F ° C ° F ° C
86 30 32 0 Strawberry 1.5HR
Tomatoes 85 29 50 10 1HR
Melon 3hr 85 29 40 4
Grapes 96 39 32 0 3.5HR
Raspberries 85 29 32 0 1.5HR
Chiles 1.5HR 86 30 50 10
Bell peppers 86 30 50 10 1HR
Cucumbers 85 29 50 10 1.5HR
Pumpkins 85 29 45 7 2HR
Lemons 95 35 46 8 1.5HR
Peaches 85 35 32 0 4HR
Papayas 90 32 50 10 2HR
Mangos 1.5HR 90 32 50 10

Madugas

Current situation:

Today, the ripening of fruits (banana, tomato, papaya, citrus, pineapple, etc.).. is done in an empirical way and extending various ripening agents such as: pure ethylene, ethanol, acetylene, calcium carbide, etc.. Not knowing the properties of each ripening agent, the application is done without control the amount of ripening agent to apply.


Proposed situation:

Bring to market a ripening agent that is more efficient, safe and easy to apply at a competitive cost.


Solution:

A mix-NITROGEN ETIILENO with which we can meet the above and offer an alternative to the client consumer. What is required?

* Madugas mixing cylinder.
* A pressure regulator with integrated flowmeter.
* Oxygen or acetylene hose.


Advantages madugas maturation.

* You get a proper presentation to the consumer.
* They extend distribution channels. Problems are eliminated on maturity and decay.
* Does not cause loss of flavor.
* High profitability


Factors affecting the ripening with ethylene.

* High concentrations of carbon dioxide.
* Low levels of oxygen.
* Very low temperatures where the fruit does not respond to ethylene.
* Time of maturation 24, 48 or 72 hours depending on each fruit.

Cold store panels

* Modular panel with heat insulation is an excellent choice for any type of construction such as cold storage refrigeration, process areas and warehouses for storage and freezing, as it ensures the absence of thermal bridges.
* Available in thickness from 1 ½ to 5 according to the operating temperature.
* Manufactured from high density polyurethane and pre-painted sheet size 26/26, white long-lasting.
* High mechanical strength.
* Excellent exterior and interior finished with different textures.
* Greater flexibility for relocation or range of cameras.


Superwall ®

It is a hidden panel with gasket fixing the overlap. Recommended for facade and interior partitions in buildings require aesthetic and wall construction as modulated by their characteristic self supporting. It offers excellent interior finishes for the different textures that may have, as they may be supplied in flat blade, muffled, and smooth with a slight groove.


Superwall ® Mini

Panel with concealed fixings and gasket on the overlap that the modular system and its optimal thermal insulation is an excellent choice for any type of construction such as cold storage refrigeration, cold rooms for storing and freezing, as it ensures the absence of thermal bridges .


Glamet ®

This panel is recommended for use as a cover for industrial, commercial and residential. For its system overlaps with gasket and the height of their peaks prevents water seepage making good storm drain. With two faces of pre-galvanized steel sheet and painted polyurethane core. With an optimum thermal insulation.

Accessories cargo ports

* Perimeter Seals

They help maintain the temperature of the platform during loading and unloading of product.


* Ramps

1. To port of shipment, type of pit or platform edge.
2. Available in manual and automatic operation.


* Overhead Doors

1. Polyurethane factories in 1 ½ thick.
2. Operation may be vertical or 90 °.
3. Optionally can be supplied with windows manual or automatic control.


* Sliding door for cold storage

We offer a wide variety of styles of sliding door leaf or duplex, for application in storage rooms and / or freezing.

The design features are made with foil frigowall PRINTO panel white interior with polyurethane insulation. Includes heavy duty FRP framework, fixing the frame roller, rail galvanized anti-dust protection, elevators adjustment and protection skid plate made with materials of the highest quality.


* Vertical sliding door.

The applications available with cooling and / or freezing, especially for areas where multiple entries are required for access to the chillers and space is limited.

They include: FRP, perimeter frame for durability, galvanized rail, lift adjustment, protection against dust Jan. l track, skid plate protection and joint seals. His production is to frigowall panel of laminated white PINTRO different thicknesses depending on the application.